manualshive.com logo in svg

ZyXEL Communications ZyXEL Prestige 202, User Manual

The ZyXEL Prestige 202, a reliable networking device, offers seamless connectivity. Enhance your internet experience with this high-performing modem and router. For optimal usage, download the user manual for free from manualshive.com and unlock all the features of this exceptional product. Simplify setup and troubleshooting with the comprehensive manual.

Share
Download
background image

Prestige 202 ISDN Router

3-4

Internet Access

DNS Server Address

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and
vice versa, e.g., the IP address of 

www.zyxel.com

 is 204.217.0.2. The DNS server is extremely

important because without it, a user must know the IP address of a machine before s/he can access
it.

There are two ways that an ISP disseminates the DNS server addresses. The first is for an ISP to
tell a customer the DNS server addresses, usually in the form of an information sheet, when s/he
signs up. If your ISP does give you the DNS server addresses, enter them in the 

DNS Server

 fields

in 

DHCP Setup

. The second is to leave this field blank, i.e., 0.0.0.0 – in this case the Prestige acts

as a DNS proxy.

Some ISP’s choose to pass the DNS servers using the DNS server extensions of PPP IPCP (IP
Control Protocol) after the connection is up. If your ISP did not give you explicit DNS servers,
chances are the DNS servers are conveyed through IPCP negotiation. The Prestige supports the
IPCP DNS server extensions through the DNS proxy feature.

If the 

Primary 

and

 Secondary DNS Server 

fields in 

DHCP Setup

 are not

 

specified, i.e., left as

0.0.0.0, the Prestige tells the DHCP clients that it by itself is the DNS server. When a workstation
sends a DNS query to the Prestige, the Prestige forwards the query to the real DNS server learned
through IPCP and relays the response back to the workstation.

Please note that DNS proxy works only when the ISP uses the IPCP DNS server extensions. It does
not mean you can leave the DNS servers out of the DHCP setup under all circumstances. If your
ISP gives you explicit DNS servers, make sure that you enter their IP addresses in the 

DHCP

Setup

 menu. This way, the Prestige can pass the DNS servers to the workstations and the

workstations can query the DNS server directly without the Prestige’s intervention.

Example of Network Properties for LAN Servers With Fixed IP#

Choose an IP:

192.168.1.2 to 192.168.1.32; 192.168.1.65 to 192.168.1.254.

Netmask:

255.255.255.0

Gateway (or default route): 192.168.1.1 (Prestige LAN IP)

DNS server:

192.168.1.1

Domain:

(optional)

Summary of Contents for ZyXEL Prestige 202






















































































































































































































Reviews:

No comments

Related manuals for ZyXEL Prestige 202

UNICOM PoE Injector Adapter POE-32001T Specifications preview
PoE Injector Adapter POE-32001T
Brand: UNICOM Pages: 1
Hama W11 Operating Instructions preview
W11
Brand: Hama Pages: 4
Hama PS-100 Bluetooth Printer Adapter Operating Instruction preview
PS-100 Bluetooth Printer Adapter
Brand: Hama Pages: 8
Hama Nano-Bluetooth-USB-Adapter Operating Instruction preview
Nano-Bluetooth-USB-Adapter
Brand: Hama Pages: 34
Hama 53173 Operating Instructions Manual preview
53173
Brand: Hama Pages: 36
Hama 53160 Operating Instruction preview
53160
Brand: Hama Pages: 22
Hama 53150 Operating Instructions Manual preview
53150
Brand: Hama Pages: 12
Hama Powerline LAN Set Operating Instruction preview
Powerline LAN Set
Brand: Hama Pages: 28
Hama 53137 Operating Instructions Manual preview
53137
Brand: Hama Pages: 40
Hama USB 2.0 Fast Ethernet Adapter Operating Instruction preview
USB 2.0 Fast Ethernet Adapter
Brand: Hama Pages: 7
Hama Nano Bluetooth USB Adapter Operating Instruction preview
Nano Bluetooth USB Adapter
Brand: Hama Pages: 16
D-Link RANGEBOOSTER N 650 Quick Installation Manual preview
RANGEBOOSTER N 650
Brand: D-Link Pages: 24
Dynex DX-TADPT1 Quick Setup Manual preview
DX-TADPT1
Brand: Dynex Pages: 2
Exsys EX-47000 User Manual preview
EX-47000
Brand: Exsys Pages: 2
3idee smsng-s24d Assembly Instructions Manual preview
smsng-s24d
Brand: 3idee Pages: 7
Aiphone RY-IP44 Programming Manual preview
RY-IP44
Brand: Aiphone Pages: 15
Pullman Holt 102-DA Operation & Care Instructions Manual preview
102-DA
Brand: Pullman Holt Pages: 6
ZNYX ZX240 Series User Manual preview
ZX240 Series
Brand: ZNYX Pages: 13

Brands by name

Popular brands

Load more brands