manualshive.com logo in svg

ZyXEL Communications ZYWALL 2 WG, User Manual

Share
Download
ZyXEL Communications ZYWALL 2 WG User Manual Download Page 653

 Chapter 43 Firmware and Configuration File Maintenance

ZyWALL 2WG User’s Guide

653

FTP is the preferred method for restoring your current computer configuration to your 
ZyWALL since FTP is faster. Please note that you must wait for the system to automatically 
restart after the file transfer is complete.

"

WARNING!
Do not interrupt the file transfer process as this may PERMANENTLY 
DAMAGE YOUR ZyWALL. When the Restore Configuration process is 
complete, the ZyWALL will automatically restart.

43.4.1  Restore Using FTP

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file 
upload in this chapter.

Figure 435   

Telnet into Menu 24.6

1

Launch the FTP client on your computer.

2

Enter “open”, followed by a space and the IP address of your ZyWALL.  

3

Press 

[ENTER] 

when prompted for a username.

4

Enter your password as requested (the default is “1234”).

5

Enter “bin” to set transfer mode to binary.

6

Find the “rom” file (on your computer) that you want to restore to your ZyWALL.

7

Use “put” to transfer files from the ZyWALL to the computer, for example, “put 
config.rom rom-0” transfers the configuration file “config.rom” on your computer to the 
ZyWALL. See earlier in this chapter for more information on filename conventions.

        Menu 24.6 -- System Maintenance - Restore Configuration

To transfer the firmware and configuration file to your workstation, 
follow the procedure below:

1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your router. Then type "root" and   
SMT password as requested.
3. Type "put backupfilename rom-0" where backupfilename is the name of   
your backup configuration file on your workstation and rom-0 is the   
remote file name on the router. This restores the configuration to   
your router.
4. The system reboots automatically after a successful file transferFor 
details on FTP commands, please consult the documentation of your 
FTPclient program. 

For details on backup using TFTP (note that you must remain in this menu 
to back up using TFTP), please see your router manual.

Press ENTER to Exit:

Summary of Contents for ZYWALL 2 WG

















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands