manualshive.com logo in svg

ZyXEL Communications ZYWALL 2 WG, User Manual

Share
Download
ZyXEL Communications ZYWALL 2 WG User Manual Download Page 307

 Chapter 14 IPSec VPN

ZyWALL 2WG User’s Guide

307

"

The ZyWALL and the remote IPSec router must use the same pre-shared key.

Router identity consists of ID type and ID content. The ID type can be IP address, domain 
name, or e-mail address, and the ID content is a specific IP address, domain name, or e-mail 
address. The ID content is only used for identification; the IP address, domain name, or e-mail 
address that you enter does not have to actually exist.
The ZyWALL and the remote IPSec router each has its own identity, so each one must store 
two sets of information, one for itself and one for the other router. Local ID type and ID 
content refers to the ID type and ID content that applies to the router itself, and peer ID type 
and ID content refers to the ID type and ID content that applies to the other router in the IKE 
SA.

"

The ZyWALL’s local and peer ID type and ID content must match the remote 
IPSec router’s peer and local ID type and ID content, respectively.

In the following example, the ID type and content match so the ZyWALL and the remote 
IPSec router authenticate each other successfully.

In the following example, the ID type and content do not match so the authentication fails and 
the ZyWALL and the remote IPSec router cannot establish an IKE SA.

It is also possible to configure the ZyWALL to ignore the identity of the remote IPSec router. 
In this case, you usually set the peer ID type to 

Any

. This is not as secure as other peer ID 

types, however.

14.3.1.2.1  Certificates

It is also possible for the ZyWALL and remote IPSec router to authenticate each other with 
certificates. In this case, the authentication process is different.

Table 85   

VPN Example: Matching ID Type and Content

ZYWALL

REMOTE IPSEC ROUTER

Local ID type: E-mail

Local ID type: IP

Local ID content: [email protected]

Local ID content: 1.1.1.2

Peer ID type: IP

Peer ID type: E-mail

Peer ID content: 1.1.1.2

Peer ID content: [email protected]

Table 86   

VPN Example: Mismatching ID Type and Content

ZYWALL

REMOTE IPSEC ROUTER

Local ID type: E-mail

Local ID type: IP

Local ID content: [email protected]

Local ID content: 

1.1.1.2

Peer ID type: IP

Peer ID type: E-mail

Peer ID content: 

1.1.1.15

Peer ID content: [email protected]

Summary of Contents for ZYWALL 2 WG

















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands