ZyXEL Communications ZyWALL 10/10, User Manual

Page: 76 / 342

ZyWALL 10/10 II/50 Internet Security Gateway
6-4 Internet Access
For the service provider, PPPoE offers an access and authentication method that works with existing access
control systems (e.g., Radius). For the user, PPPoE provides a login & authentication method that the
existing Microsoft Dial-Up Networking software can activate, and therefore requires no new learning or
procedures for Windows users.
One of the benefits of PPPoE is the ability to let end users access one of multiple network services, a function
known as dynamic service selection. This enables the service provider to easily create and offer new IP
services for specific users.
Operationally, PPPoE saves significant effort for both the end user and ISP/carrier, as it requires no specific
configuration of the broadband modem at the customer site.
By implementing PPPoE directly on the ZyWALL 10/10 II/50 (rather than individual computer’s), the
computers on the LAN do not need PPPoE software installed, since the ZyWALL does that part of the task.
Furthermore, with NAT, all of the LAN’s computers will have access.
If you enable PPPoE in menu 4, you will see the next screen. For more information on PPPoE, please see
the
Appendices .
Figure 6-3 Internet Access Setup (PPPoE)
Table 6-3 New Fields in Menu 4 (PPPoE) screen
FIELD DESCRIPTION EXAMPLE
Encapsulation Press [SPACE BAR] and then press [ENTER] to choose PPPoE . The
encapsulation method influences your choices for IP Address.
PPPoE
Idle Timeout This value specifies the time in seconds that elapses before the
ZyWALL automatically disconnects from the PPPoE server. 100
(default)
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
Service Type= N/A
My Login=
My Password= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: