ZyXEL Communications ZyWALL 10/10, User Manual

Page: 61 / 342

ZyWALL 10/10 II/50 Internet Security Gateway
General and WAN Setup 4-3
Domain Name Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domain name" to see the current domain
name used by your router.
If you want to clear this field just press [SPACE BAR] and then
[ENTER]. The domain name entered by you is given priority over the
ISP assigned domain name.
zyxel.com.tw
Edit Dynamic
DNS Press [SPACE BAR] and then [ENTER] to select Yes or No (default).
Select Yes to configure Menu 1.1 — Configure Dynamic DNS
discussed next.
No
(default)
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
4.3.1 Configuring Dynamic DNS
To configure Dynamic DNS, go to Menu 1 — General Setup and press [SPACE BAR] to select Yes in
the Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS (shown
next).
Figure 4-2 Configure Dynamic DNS
Follow the instructions in the next table to configure Dynamic DNS parameters.
Table 4-2 Configure Dynamic DNS Menu Fields
FIELD DESCRIPTION EXAMPLE
Service Provider This is the name of your Dynamic DNS service provider. WWW.DynDNS.ORG
(default)
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= Yes
DDNSType= DynamicDNS
Host=
EMAIL=
USER=
Password= ********
Enable Wildcard= No
Offline= N/A
Press ENTER to confirm or ESC to cancel: