ZyXEL Communications ZyAIR G-3000H User Manual Download Page 102

Page: 102 / 299

G-3000H User’s Guide

102

Chapter 9 VLAN

Figure 54

VLAN

The following table describes the labels in this screen.

Table 34

VLAN

LABEL

DESCRIPTION

Enable VLAN Tagging Select this check box to turn on VLAN tagging.

Management VLAN ID Enter a number from 1 to 4094 to define this VLAN group. At least one device

in your network must belong to this VLAN group in order to manage the ZyAIR.

Note:

Mail and FTP servers must have the same management

VLAN ID to communicate with the ZyAIR.

See

Configuring Management VLAN Example on page 103

for more

information.

VLAN Mapping Table

Use this table to map names to VLAN IDs so that the RADIUS server can

assign each user or user group a mapped VLAN ID. See the your RADIUS

server documentation for more information on configuring VLAN ID attributes.
See

Configuring Microsoft’s IAS Server Example on page 105

for more

information.

Index

Select a check box to enable the VLAN mapping profile.

Type a VLAN ID. Incoming traffic from the WLAN is authorized and assigned

a VLAN ID by the RADIUS server before it is sent to the LAN.

Note:

This ID is NOT the same as the VLAN ID displayed in the

SSID screen.

Summary of Contents for ZyAIR G-3000H












































































































































































































































































































Search results

Summary of Contents for ZyAIR G-3000H

Reviews:

Brands by name

Popular brands

ZyXEL Communications ZyAIR G-3000H, User Manual

Search results

Summary of Contents for ZyAIR G-3000H

Reviews:

Brands by name

Popular brands