8. [Syslog] Due to the radius server IP problem (set wrong/inexistence radius server
IP),SNMPc should send trap(s) ”RADIUS server not reachable” for each time user try to
re-logging throu Radius server (not only display the trap once)?
9. [Policy Route] When create policy route, then subnet A ping access IP_B fails.?
10. [Arp Inspection] The log-buffer entries display abnormal in ARP inspection log-buffer
function.?
11. [Rmirror] In web page, it must enable mirror port and direction,then work. But, in cli, it only
configure mirror port direction directly. It make user confuse easily.?
12. [IPv6] In web page, user can modify and delete the global address ruler. But, user only can
modify the link-local address ruler. What is difference between global address and
link-local address?? Please refer to the attachment file.?
13.
[Radius] When radius server only exists in server 2, device will send ”Radius server 1 is
unreachable” syslog. But, when radius server exists in server 1, device could not
send ”server 1 is reachable” syslog. Please refer to the attachment file.?
14. [CFM] After send LBM packets into device, device could not response with LBR. (it may be
cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. Please
refer to script log.?
15. [Clone] When port copy running-config need long time. And destination port link down/link
up when cloning.?
16. [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time
out. But, CLI will diplay ”transmit 3 packets,...”. It makes user confused easily.
17. [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should
send 9 ns packets, not 3 ns packets.?
18. [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface,
ping will time out. After unplug and plug-in the cable, ping will be ok. Please refer to the
attachment file.
19. [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link
re 7003 mep 1003 ma 3 md 1), the
”
chassis-id
”
field should be N/A, not empty or
scramble . (eth cfm link re 7003 mep 1003 ma 3 md 1). Please refer to the attachment file.
20. [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re
7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from
down to up , it will be ok. The root cuase may be spanning blocking port. It seems that
spanning blocking port will effect mep direction setting. Please refer to the attachment file.
21. [MAC-Pinning] When enable mac trunking ports already learned {MAC A, VLAN
A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}
22. [Upgrade firmware] After upgrade firmware via web page, then CLI login fail during printing
“.”. Please refer to the attachment file.
23. [IP Load Sharing] It only create 8 static route entry. When create over 8 entry, CLI will pop
error messages. Please refer to the attachment file.
24. [IPv6 Interface VLAN] Create over 64 ipv6 interface vlan, it should pop error message.
Error: IPv6 iface number exceeds maximum, not Error: Static VLAN number exceeds
maximum!. Please refer to the attachment file.
25. [IPv6 Interface vlan] Create 64 interface vlan and enter the existent interface vlan, CLI will
pop error messages. Error: Static VLAN number exceeds maximum! Please refer to the
attachment file.
26. [MIB-zyxelMldSnoopingProxy] When creating max zyMldSnoopingProxyVlanRowStatus
(OID: 1.3.6.1.4.1.890.1.15.3.51.3.5.1.2) rules, the max rules can’t be deleted via MIB
Browser.
27. [IPv6 Neighbor] It only create 64 interface vlan. But, it can create 256 neighbor entry with
different vlan 1~256. it will cause some useless neighbor entry. Please refer to the
attachment file.
28.
[Syslog] Autonegotiation sync failed: a log message ”WA interface: port 2 link speed and
duplex mode autonegotiation has fail
ed” should be shawn when show logging
29. [MIB-zyxelIpv6StaticRoute] When setting the zyIpv6StaticRouteNextHopIpAddress (OID:
1.3.6.1.4.1.890.1.15.3.37.1.2.1.5) to default value, it will pop error message but the value
should be able to set OK.
30. [IPv6 Prefix] In ipv6 prefix, prefix lifetime could not smaller than valid lifetime. Please refer
to the attachment file.
31. [Port Setup] When all port inactive/active, CLI pop error message.
32. [LACP+MRSTP+L2PT] When enable lacp+mrstp+l2pt, the lacp sync fails.
