377. [ACL] The classifier table only display 64 entries in Policy page when create 320
classifier entries.
378. [Private VLAN] A port which assigned by one static VLAN can assigned to private VLAN.
Besides, after erase running, CLI will pop error messages.
379. [Private VLAN]:The error message for some E
nglish words can’t spell correctly.
380. [Rmirror] In web page, it can create 3 Rmirror VLAN ruler with reflector port active: Yes.
(Rmirror VLAN ruler only enable source reflector port and source reflector port number,
not enable mirror port) CLI will be ok.
381. [Rmirror]In web page, it can create 3 Rmirror VLAN ruler with reflector port active: Yes
(Rmirror VLAN ruler enable source reflector, source reflector port number, mirror port). But,
The mirror port setting in 3rd Rmirror VLAN ruler is inconsistent between CLI and Web.
Besides, it will pop error messages during system reboot. After reboot, show running will
be abnormal.
382. [Rmirror] In web page, it can create Rmirror VLAN ruler with source reflector port, source
reflector port number. But, it could not apply mirror port setting into the same Rmirror
VLAN ruler ag
ain. Web will pop error message. ”Reflector port config fail! the port is fixed
by VLAN 100 (R
mirror VLAN)”.
Enhanced Features:
1.
Limitation of Settings:
1.
VLAN 1Q static entry
4K
2.
Static MAC forwarding entry
256
3.
MAC filtering entry
256
4.
Cluster member
24
5.
IP routing domain
128
6.
IGMP Filtering entry
256
7.
IGMP MVR entry
256
8.
VRRP entry
64
9.
Protocol based VLAN entries per port
7
10. Port-security max address-limit number
16K
11. DHCP Server
16
12. Syslog server entry
4
13. IP source guard entry
1K
14. IP subnet based VLAN entry
16
15. MVR VLAN entry
5
16. Vlan-stacking Selective QinQ entry
1K
17. Vlan-mapping entry
1K
18. MAC table
16K
19. Routing table
1k
20. DHCP snooping binding table
16K
21. Routing path
512
22. Multicast group
1K
23. ACL 384
24. Policy route
64
25. DHCP option 82 profile 130
26. Remote port monitoring vlan
10
27. trtcm DSCP profiles
max number of port
28. static arp entry
256
29. Static route max entry
64
Firmware Upgrade:
The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server.
You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP.
The upgrade procedure is as follows:
