ZyXEL Communications WAP5705, User Manual

Page: 99 / 156

WAP5705 User’s Guide
99
C
H A P T E R
1 2
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• WAP5705 Access and Login
• Internet Access
• Resetting the WAP5705 to Its Factory Defaults
12.1 Power, Hardware Connections, and LEDs
The WAP5705 does not turn on. None of the LEDs turn on.
1
Make sure you are using the power adaptor or cord included with the WAP5705.
2
Make sure the power adaptor or cord is connected to the WAP5705 and plugged in to an
appropriate power source. Make sure the power source is turned on.
3
Disconnect and re-connect the power adaptor or cord to the WAP5705.
4
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See Section 1.6 on page 13 .
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
Disconnect and re-connect the power adaptor to the WAP5705.
5
If the problem continues, contact the vendor.