Chapter 5 Universal Repeater Mode
WAP3205 v2 User’s Guide
36
5.7 Universal Repeater Screen
Use this screen to enter the SSID and select the wireless security mode used by the wireless device
to which you want to connect. Go to
Configuration > Wireless LAN > Universal Repeater
to
open the
Universal Repeater
screen. The screen varies depending on security mode.
Note: To have wireless clients access or acquire an IP address from another access point
or wireless router (
B
) through the WAP3205 v2 (
A
) in universal repeater mode,
you must set the channel number in the
Wireless LAN > General
and
Wireless
LAN > Universal Repeater
screens to be the same as the one on the wireless
router or AP to which the WAP3205 v2 wants to connect.
5.7.1 No Security
Figure 21
Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security
The following table describes the labels in this screen.
A
B
Table 16
Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security
LABEL
DESCRIPTION
Universal Repeater Parameters
Enable
Select this option to have the WAP3205 v2 connect to the specified access point.
WLAN STA setting
overwrites WLAN
AP setting
Select the check box to have the WAP3205 v2 copy the SSID and wireless security
settings of the associated AP, and use them for wireless connections between the
WAP3205 v2 and its wireless clients. The new settings will display in the
Wireless LAN >
General
screen.
Otherwise, clear the check box to configure different wireless and security settings in the
Wireless LAN > General
screen for wireless connections between the WAP3205 v2 and
its wireless clients.
SSID
Enter the name of the access point to which you are connecting.
MAC Address
(Optional)
Enter the MAC address of the access point to which you are connecting.
