Chapter 4 Client Mode
WAP3205 v2 User’s Guide
23
The following table describes the labels shown in the
Status
screen.
Table 6
Status Screen: Client Mode
LABEL
DESCRIPTION
Logout
Click this at any time to exit the Web Configurator.
Device Information
Host Name
This is the WAP3205 v2’s model name.
Firmware Version
This is the firmware version and the date created.
Sys OP Mode
This is the device mode (
) to which the WAP3205 v2 is set -
Client
Mode
.
LAN Information
MAC Address
This shows the LAN Ethernet adapter MAC Address of your device.
IP Address
This shows the LAN port’s IP address.
IP Subnet Mask
This shows the LAN port’s subnet mask.
DHCP
This shows the LAN port’s DHCP role -
Client
or
None
.
WLAN Information
WLAN OP Mode
This is the device mode (
) to which the WAP3205 v2’s wireless LAN
is set -
Client Mode
.
MAC Address
This shows the wireless adapter MAC Address of your device.
Status
This shows the current status of the Wireless LAN -
ON
.
Connect Status
This shows whether or not the WAP3205 v2 has successfully associated with an access point
-
Connected
or
Disassociated
.
802.11 Mode
This shows the wireless standard.
Interface Status
Interface
This displays the WAP3205 v2 port types. The port types are:
LAN
and
WLAN
.
Status
For the LAN ports, this field displays
Down
(line is down) or
Up
(line is up or connected).
For the WLAN, it displays
Up
when the WLAN is enabled or
Down
when the WLAN is
disabled.
Rate
For the LAN ports, this displays the port speed or
N/A
when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and
N/
A
when the WLAN is disabled.
System Status
Item
This column shows the type of data the WAP3205 v2 is recording.
Data
This column shows the actual data recorded by the WAP3205 v2.
System Up Time
This is the total time the WAP3205 v2 has been on.
Current Date/Time
This field displays your WAP3205 v2’s present
date and time.
System Resource
CPU Usage
This displays what percentage of the WAP3205 v2’s processing ability is currently used.
When this percentage is close to 100%, the WAP3205 v2 is running at full load, and the
throughput is not going to improve anymore. If you want some applications to have more
throughput, you should turn off other applications (for example, using bandwidth
management.
Memory Usage
This shows what percentage of the heap memory the WAP3205 v2 is using.
System Setting
Configuration Mode
This shows the web configurator mode you are viewing -
Expert
.
