manualshive.com logo in svg

ZyXEL Communications VSG-1200, User Manual

Share
Download
ZyXEL Communications VSG-1200 User Manual Download Page 56

VSG-1200 User’s Guide

56

Chapter 4 LAN, WAN and Server Setup

4.7  WAN Configuration

To configure the WAN settings on the VSG, click 

System Setting 

and 

WAN/LAN

. The 

WAN/LAN 

screen varies depending on the settings in the 

WAN Port Mode 

field.

4.7.1  Configuring WAN MAC Address

Use the 

WAN/LAN 

screen to configure the MAC address of the WAN port by either setting 

the VSG to use the factory default or specify the MAC address of a computer on the LAN.

Figure 19   

System Setting: WAN/LAN: WAN MAC Address 

The following table describes the related field in this screen. 

Note: 

You must restart the VSG if you change the IP address. 

If you set the VSG as a DHCP server on the LAN, the VSG will automatically 
change the LAN DHCP settings based on the new LAN IP address.

Table 6   

System Setting: WAN/LAN: WAN MAC Address 

FIELD

DESCRIPTION

WAN MAC Address

Select 

Default

 to use the factory assigned MAC address.

If your ISP requires MAC address authentication, select 

Change to

 and enter 

the MAC address of a computer on the LAN in the fields provided.

Summary of Contents for VSG-1200

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands