manualshive.com logo in svg

ZyXEL Communications VSG-1200, User Manual

Share
Download
ZyXEL Communications VSG-1200 User Manual Download Page 246

VSG-1200 User’s Guide

246

Appendix E Report Printing Using the SP-200

Figure 173   

SP-200: System Status   

The following table describes the labels in this report. 

System Status

----------------------------
ITEM DESCRIPTION
----------------------------
WAST ESTABLISHED
SYST 02D:02H:42M:46S
----------------------------
HOST VSG-1200
FRMW 1.05
BTRM 1.01
LOCA
WAMA 00-90-0E-00-4A-29
LAMA 00-90-0E-00-4A-28
WATP DHCP
WAIP 172.21.2.67
WASM 255.255.0.0
WAGW 172.21.0.254
PDNS 172.20.0.63
SDNS 172.20.0.27
DHCP DHCP SERVER
DHSP 10.59.1.2
DHEP 10.59.1.254
DHLT 1440
EMAIL /PORT25
----------------------------

2004/10/28 11:24:42

---End---

Table 89   

SP-200: System Status 

LABEL

DESCRIPTION

WAST

This field displays the WAN connection status.

SYST

This field displays the time since the system was last restarted. 

HOST

This field displays the description name of the VSG for identification purposes.

FRMW

This field displays the version of the firmware on the VSG.

BTRM

This field displays the version of the bootrom.

WAMA

This field displays the MAC address of the VSG on the WAN.

LAMA

This field displays the MAC address of the VSG on the LAN.

WATP

This field displays the mode of the WAN port.

WAIP

This field displays the IP address of the WAN port on the VSG.

WASM

This field displays the subnet mask of the WAN port on the VSG.

WAGW

This field displays the IP address of the default gateway of the WAN port on the VSG.

PDNS

This field displays the IP address of the primary DNS server.

SDNS

This field displays the IP address of the secondary DNS server.

Summary of Contents for VSG-1200

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands