ZyXEL Communications VSG-1200 User Manual Download Page 229

Page: 229 / 280

VSG-1200 User’s Guide

Chapter 29 Troubleshooting

229

29.3 Web Configurator

I cannot access the

web configurator.

The

web configurator does not display properly.

29.4 Internet Access

A subscriber cannot connect to the

Internet through the VSG.

Table 79

Troubleshooting Web Configurator

STEP

CORRECTIVE ACTION

Make sure you are using the correct WAN or LAN IP address.

Make sure you entered the correct username and password. The default administrator

username is “admin” and the default password is “1234”. The username and password are

case-sensitive.
If you change the server port number, you need to append the port number to the

WAN

LAN

port IP address to access the web configurator. For example, if you enter “8010” as the

web server port number, then you must enter “http://www.192.168.1.1:8010” where

192.168.1.1 is the WAN or LAN port IP address.
If you have forgotten the administrator user name and/or password, you must reset the VSG

back to the factory defaults using the reset button. Use a pointed object to press the reset

button on the front panel to reset the VSG. All your custom configuration will be lost.

Ping the VSG from your computer on the WAN or LAN.

Table 80

Troubleshooting Internet Browser Display

STEP

CORRECTIVE ACTION

Make sure you are using Internet Explorer (version 4.0 and later) or Netscape (version 6.0 or

later) with JavaScript support enabled.

Delete the temporary web files and log in again.
In Internet Explorer, click

Tools

Internet

Options

and then click the

Delete

Files ...

button.

When a

Delete Files

window displays, select

Delete

all offline content and click

. (Steps

may vary depending on the version of your Internet browser.)

Table 81

Troubleshooting Internet Access

STEPS

CORRECTIVE ACTION

Check your Internet settings on your modem and/or router.

Make sure the subscriber enters the correct user name and password to log in to the VSG.

The user name and password are case sensitive.

Make sure the account is still valid.

Make sure there is no conflict in IP address assignment. Refer to the appendix.

Summary of Contents for VSG-1200

























































































































































































































































































Search results

Summary of Contents for VSG-1200

Reviews:

Brands by name

Popular brands

ZyXEL Communications VSG-1200, User Manual

Search results

Summary of Contents for VSG-1200

Reviews:

Brands by name

Popular brands