manualshive.com logo in svg

ZyXEL Communications VSG-1200, User Manual

Share
Download
ZyXEL Communications VSG-1200 User Manual Download Page 184

VSG-1200 User’s Guide

184

Chapter 24 System Status

24.7.1  Accessing the LAN Device

Before you can access a LAN device behind the VSG, the following requirements must be 
met. 

• The LAN device has a web-based management interface and it is enabled.
• You have set up the virtual port mapping to the LAN device server port in the 

LAN 

Device Management 

screen.

• The LAN device status is 

OK 

in the 

LAN Device Status 

screen.

There are two methods to access the LAN device: directly or through the web configurator.

• To access the LAN device through the web configurator, open the 

LAN Device Status 

screen and click the device name. A new Internet browser should display showing the 
login screen of the LAN device management interface.

• To directly access the LAN device, enter the WAN IP address of your VSG and the 

virtual port number of the LAN device separated by a colon. For example, enter “http:// 
192.168.1.1:60001” where 192.168.1.1 is the WAN IP address of the VSG. The login 
screen of the LAN device management interface should display.

24.8  Billing Logs

Click 

System Status 

and 

Billing Log 

in the navigation panel to display the screen as shown. 

Refer to 

Section 24.8.1 “Billing Logs Backup” on page 185

 

for information on backing up the 

billing logs to a computer.

Device MAC 

Address

This field displays the MAC address of the LAN device.

Application

This field displays the type of application packet that is forwarded to the LAN 

device.

Table 62   

System Status: LAN Device Status  (continued)

LABEL

DESCRIPTION

Summary of Contents for VSG-1200

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands