74 Fax Operation
Command
Value Description
+FKS
Session termination command.
+FLI="string"
Local ID string parameter.
+FLO=n
Flow control options:
n=0
No flow control.
n=1
Set XON/XOFF software flow control.
n=2
Set CTS/RTS hardware flow control.
+FLP=n
Document for polling command:
n=0
The DTE has no document for polling.
n=1
Indicated document available for
polling.
+FMI?
Request DCE manufacturer
identification.
+FMM?
Request DCE model identification.
+FMR?
Request DCE revision identification.
+FMS=n
Minimum phase C speed parameter.
refer to +FMINSP Class 2 command in
previos section for parameter settings.
+FNR=rpr,tpr,
idr,nsr
Negotiation message reporting control
parameters:
rpr=0
Receiver parameters are not reported.
+FIS: and +FTC: response reports are
suppressed.
rpr=1
Receiver parameters are reported. +FIS:
and +FTC: response reports are
generated.
tpr=0
Transmitter Parameters are not
reported. +FCS: response reports are
suppressed. (+FCS parameter is still
loaded)
tpr=1
Transmitter Parameters are reported.
+FCS: response reports are generated.
idr=0
ID Strings are not reported. +FTI:
Summary of Contents for U-336S
