ZyXEL Communications U-336S, User Manual

Page: 93 / 159

Fax Operation 81
Command Function
#C3 Set minimum scan line time capability of the
receiver: 20 ms at 3.85 line/mm, T(7.7)=1/2
T(3.85).
#C4 Set minimum scan line time capability of the
receiver: 40 ms at 3.85 line/mm, T(7.7)=T(3.85).
#C5 Set minimum scan line time capability of the
receiver: 40 ms at 3.85 line/mm, T(7.7)=1/2
T(3.85).
#C6 Set minimum scan line time capability of the
receiver: 10 ms at 3.85 line/mm, T(7.7)=1/2
T(3.85).
#C7 Set minimum scan line time capability of the
receiver: 0 ms at 3.85 line/mm, T(7.7)=T(3.85).
#P<string> Set local phone number to the phone number
following the character 'P' can store up to 25
characters. The modem will exchange this phone
number with the remote fax machine during initial
handshaking.
Status Report Result Codes
When the U-336S is in fax mode, each ATD or ATA command will
make the modem try to establish a fax connection. Your modem
will send a status report result code back to the DTE (computer).
NO DIAL
TONE Tried to dial but no dial tone is detected.
NO CARRIER Handshake fails or no carrier is detected or
time-out.
BUSY Other party's phone line is busy.
NO ANSWER Quiet answer is not detected before time-out.
CONNECT FAX See below.