ZyXEL Communications U-336E, User Manual

Page: 48 / 137

36 Special Functions
There are two kinds of caller information message formats sent by
the phone company.
•
One is the single message format which includes date, time, and
caller ID
•
The other is the multiple message format which also includes
the caller name as registered with the phone company.
The command ATS40.2=n is used to enable (n=1) or disable (n=0)
the Caller ID detection function. The default is disabled. Enable it
only when you have this service and want to enable its detection.
O O
N
OTE
: T
HE
C
ALLER
ID
MESSAGE MAY CAUSE SOME COMMUNICATION SOFTWARE THAT
IS NOT EXPECTING IT TO BECOME CONFUSED
. I
F YOU PLAN TO USE THE
C
ALLER
ID
FEATURE
,
BE SURE YOU ARE USING SOFTWARE THAT SUPPORTS IT
(
SUCH AS
ZFAX).
In single message format, the modem will send a ring message to
the terminal as follows:
RING
TIME: <MM-DD hh:mm>
CALLER NUMBER: <CALLER_ID> or CALLER
NAME:<CALLER_NM>
RING
MM is the two-digit month message, DD is the two-digit date
message, hh is the hour and mm is the minute of the time, and
CALLER_ID is the phone number of the caller or CALLER_NM
his/her name.
The following is an example of a caller ID message as it might
appear on your screen:
RING
TIME: 04-28 12:30