ZyXEL Communications STB-1003, User Manual

Page: 30 / 98

Chapter 2 The Menu System
STB-1003 User’s Guide
30
The following table describes the labels in this menu.
2.3.3.2 Network: Static IP Address
Select Static in the Network menu. The following menu displays.
Figure 11 The Network: Static IP Menu
The following table describes the labels in this menu that were not already described in table 7 .
Table 7 The Network: DHCP Menu
LABEL DESCRIPTION
Mode Select DHCP to have the STB obtain an IP address automatically.
TFTP Server Enter the IP address of the Trivial File Transfer Protocol Server
which supplies TV and video to the STB.
Home URL Enter the address of the homepage the STB uses as the Home
menu (the screen that displays when you press the HOME key on
the remote control).
ACS Server This field is for remote management. Change the information in
this field only if you were specifically told to do so.
Enter the address of the auto-configuration server from which the
STB gets its operating settings.
NTP Server Enter the address of the Network Time Protocol server from which
the STB gets its date and time settings.
Save Select this to store your configuration changes.
Table 8 The Network: Static IP Menu
LABEL DESCRIPTION
Mode Select Static to give the STB a specific IP address.
STB IP Enter the IP address you want to assign to the STB.
Subnet Mask Enter the subnet mask of the STB’s IP address.
Gateway Enter the IP address of the network gateway.