ZyXEL
P-2000W Quick Start Guide
!
Press the
Left Selector key
to choose your wireless
network. The phone will display “OK” and return to the
Wireless Menu.
!
Press the
Right Selector key
twice to save your
new settings. An hourglass will appear on the LCD
Screen, indicating your phone is saving the new settings.
Your phone will now reboot.
!
Once the phone reboots, it should connect to your
wireless network and obtain an IP address. This can
take from 30 seconds to two minutes. When finished,
the LCD Screen should display
“Registered”
. Proceed
to Section 5,
Making and Receiving Calls
.
!
If the screen still displays
“Net failed”
with an
error code, please retry the steps in this section.
Also, verify the wireless security settings on your
wireless router. If WEP is required, proceed to the
next section,
Setting up WEP on your Phone
.
!
After powering on, the LCD Screen may display
“Not
Registered”
, indicating the phone connected to your
network, but can’t connect to BroadVoice through the
Internet. In this case, please retry Section 2,
Setting Up
BroadVoice on your Phone
. Otherwise, proceed to the
Troubleshooting
and
Support
sections of this guide.
Page
12
