Prestige 681 SDSL Router
7-4
IPX Configuration
7.3 IPX Ethernet Setup
From
Menu 3 - Ethernet Setup
, enter 3 to go to
Menu 3.3 - Novell IPX Ethernet Setup
as shown in the
figure below.
Figure 7-3
Menu 3.3 - Novell IPX Ethernet Setup
The following table describes the Novell IPX Ethernet Setup Menu.
Table 7-1
Novell IPX Ethernet Setup Fields
Field
Description
Options
Seed Router
Determine if your Prestige 681 is to act as a seed
router.
Yes/No
Frame Type
Enable/Disable the individual frame type.
Remember to enable only the ones that are actually
used on your network.
802.2
802.3
Ethernet
II
SNAP
IPX Network
#
If your Prestige 681 is a seed router, enter a unique
network number for each frame type enabled.
Press [ENTER] at the message [Press ENTER to Confirm ...] to save your
configuration, or press [Esc] at any time to cancel.
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
