Prestige 681 SDSL Router
2-1
Hardware Installation & Setup
Chapter 2:
Hardware Installation & Initial Setup
2.1 Front Panel LEDs OF P681
The LED indicators on the front panel indicate the operational status of the Prestige 681. The table below
the diagram describes the LED functions:
Figure 2-1
Prestige 681 Front Panel.
Table 2-1
Front Panel LED Description
PWR
The PWR (power) LED is on when power is applied to the Prestige.
SYS
A steady on SYS (system) LED indicates the Prestige is on and functioning properly
while an off SYS LED indicates the system is not ready or a malfunction. The
system is rebooting when the SYS LED is blinking.
LAN 10M
A steady
green
light indicates a 10Mb Ethernet connection. The LED blinks when
data is being sent/received.
LAN 100M
A steady
yellow
light indicates a 100Mb Ethernet connection. The LED blinks when
data is being sent/received.
SDSL
The SDSL LED is on when the Prestige is connected successfully to a DSLAM. The
LED blinks when the link is still synchronizing –0 note that this may take up to 10
minutes. The LED is off when the link is down.
This chapter describes the physical features of the
Prestige and how to make the cable connections
.
