Prestige 681 SDSL Router
Filter Configuration
9-19
Figure 9-14
Filtering Ethernet traffic
9.6.2 Remote Node Filters
Go to Menu 11.5 (shown next) and enter the number(s) of the filter set(s) as appropriate. You can cascade
up to four filter sets by entering their numbers separated by commas. The factory default filter set,
NetBIOS_WAN, is inserted in
protocol filters
field under
Call Filter Sets
in Menu 11.5 to block local
NetBIOS traffic from triggering calls to the ISP. The TELNET filter is designed to block outside users
telnetting into the Prestige see (
Figure 9-10
)
Figure 9-15
Filtering Remote Node traffic
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
2
Press ENTER to Confirm or ESC to Cancel:
NetBIOS_LAN
factory default
filter
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 3
device filters=
Output Filter Sets:
protocol filters= 1
device filters=
Enter here to CONFIRM or ESC to CANCEL:
NetBIOS_WAN
factory default
filter
Telnet factory
default filter
