Prestige 681 SDSL Router
3-6
WAN Setup
Standards
The two main groups that create recommendations and standards in the telecommunications field are ITU –
T (International Telecommunication Union – Telecommunications Standardization Sector) and ANSI
(American National Standards Institute). Standards vary slightly for both organizations, so please select the
correct organization in the
Link Management
field in menu 2.1. Your Network Service Provider (NSP)
should provide you with this information.
Figure 3-5
Menu 2.1 - Frame Relay Options
Table 3-4
Menu 2.1 - Frame Relay Options Fields
Field
Description
Options
Link
Management=
This function is responsible for monitoring the up/down
status and error performance of an individual link. If
failure occurs, it also initiates recovery actions for the
restoration of the failed link. Press the [SPACEBAR] and
then [ENTER] to select which standard is compatible
with your Prestige. Both the Prestige and the peer must
use the same standard
.
ITU-T(Q.933A)
ANSI(T1.617D)
Menu 2.1 - Frame Relay Options
Link Management= ANSI(T1.617D)
Press ENTER to Confirm or ESC to
Cancel:
Press Space Bar to Toggle.
