ZyXEL Communications Prestige 650M-17 User Manual Download Page 43

Page: 43 / 89

Prestige 650M-17 ADSL Modem

Remote Node Configuration

4-3

Table 4-1 Remote Node Profile Menu Fields

FIELD DESCRIPTION

EXAMPLE

Rem Node Name

Type a unique, descriptive name of up to eight characters for this
node.

Change Me

Active

Press [SPACE BAR] and then [ENTER] to select

Yes

to activate or

to deactivate this node. Inactive nodes are displayed with a

minus sign “–“ in SMT menu 11.

Yes

(default)

Encapsulation

PPPoA

refers to RFC-2364 (PPP Encapsulation over ATM

Adaptation Layer 5).
If you select

RFC 1483

(Multiprotocol Encapsulation over ATM

Adaptation Layer 5) then

Rem

Login

Rem

Password

My Login

and

My Password

fields are not applicable (

N/A

RFC 1483

(default)

Multiplexing

Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either

VC-based

LLC-based

(default)

Incoming:

Rem Login

Type the login name that this remote node will use to call your
Prestige. The login name and the

Rem

Password

will be used to

authenticate this node.

Rem Password Type the password used when this remote node calls your

Prestige.

Outgoing:

My Login

Type the login name assigned by your ISP when the Prestige calls
this remote node.

My Password Type the password assigned by your ISP when the Prestige calls

this remote node.

This field sets the authentication protocol used for outgoing calls.
Options for this field are:

CHAP/PAP

CHAP

PAP

– Your Prestige will accept either

CHAP

PAP

when

requested by this remote node.

CHAP

– accept

CHAP

(Challenge Handshake Authentication

Protocol) only.

Authen

PAP

– accept PAP (Password Authentication Protocol) only.

Bridge:

Ethernet Addr

Timeout(min)

Type the time (in minutes) for the Prestige to retain the Ethernet
Address information in its internal tables while the line is down. If
this information is retained, your Prestige will not have to recompile
the tables when the line comes back up.

Summary of Contents for Prestige 650M-17


























































































Search results

Summary of Contents for Prestige 650M-17

Reviews:

Related manuals for Prestige 650M-17

Brands by name

Popular brands

ZyXEL Communications Prestige 650M-17, User Manual

Search results

Summary of Contents for Prestige 650M-17

Reviews:

Related manuals for Prestige 650M-17

Brands by name

Popular brands