Prestige 650M-17 ADSL Modem
Internet Access
3-7
Table 3-3 Internet Access Setup Menu Fields
FIELD DESCRIPTION
EXAMPLE
ISP’s Name
Enter the name of your Internet Service Provider. This
information is for identification purposes only.
Change Me
Encapsulation
Press [
SPACE BAR
]
to select the method of encapsulation
used by your ISP. Choices are
PPPoA
or
RFC 1483
.
RFC 1483
(default)
Multiplexing
Press [
SPACE BAR
] to select the method of multiplexing
used by your ISP. Choices are
VC-based
or
LLC-based
.
LLC-based
(default)
VPI #
Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
0
VCI #
Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you.
33
ATM QoS Type
Press [SPACE BAR] and select
CBR
(Continuous Bit Rate) to
specify fixed (always-on) bandwidth. Select
UBR
(Unspecified
Bit Rate) for applications that are non-time sensitive, such as
e-mail.
UBR
(default)
Peak Cell Rate
(PCR)
This is the maximum rate at which the sender can send cells.
Type the PCR.
0
Sustain Cell Rate
(SCR)= 0
Sustained Cell Rate is the mean cell rate of a bursty, on-off
traffic source that can be sent at the peak rate, and a
parameter for burst-type traffic. Type the SCR; it must be less
than the PCR.
0
Maximum Burst Size
(MBS)= 0
Refers to the maximum number of cells that can be sent at the
peak rate. Type the MBS. The MBS must be less than 65535.
0
My Login
Enter the login name that your ISP gives you.
N/A
My Password
Enter the password associated with the login name above.
N/A
When you have completed this menu, press [
ENTER
] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [
ESC
] at any time to cancel.
If all your settings are correct your Prestige should connect automatically to the Internet. If the connection
fails, note the error message that you receive on the screen and take the appropriate troubleshooting steps.
