ZyXEL Communications Prestige 642M series, User Manual

Page: 40 / 86

Prestige 642M Series ADSL Bridge
4-4 Remote Node Configuration
Field Description Options
Bridge
Ethernet Addr
Timeout (min)
In this field, enter the time (number of minutes) that you
wish your Prestige 642 to retain the Ethernet Addr
information in its internal tables while the line is down. If
this information is retained, your Prestige 642 will not have
to recompile the tables when the line is brought back up.
VPI# Select a different PVC by changing the VPI, VCI numbers.
Enter the Virtual Path Identifier (VPI) number for this PVC.
VCI# Enter the Virtual Channel Identifier (VCI) number for this
PVC.
Filter Sets:
Specify the filter set(s) to apply to the incoming and
outgoing traffic between this remote node and the Prestige.
You can specify up to 4 filter sets separated by comma, e.g.,
1, 5, 9, 12, in each filter field. The default is no filters. Note
that spaces are accepted in this field. For more information
on defining the filters, see the chapter on
Filter
Configuration .
Input Device Filters= Specify the incoming filter sets here.
Output Device Filters= Specify the outgoing filter sets here.
Once you have completed filling in Menu 11.1 – Remote Node Profile, press [Enter] at the message
[Press ENTER to Confirm…] to save your configuration or press [Esc] at any time to cancel.