Prestige 642M Series ADSL Bridge
3-2
Internet Access
3.3 TCP/IP Ethernet Setup
You will now use Menu 3 to configure your Prestige for TCP/IP.
To edit Menu 3, enter 3 to open the
Menu 3 -
TCP/IP Setup
from the Main Menu.
Figure 3-1 Menu 3 - TCP/IP Ethernet Setup
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
Table 3-1 TCP/IP Ethernet Setup Menu Fields
Field
Description
Example
DHCP
If the DHCP field is set to
Server
then
your Prestige can assign IP
addresses, an IP default gateway and DNS servers to Windows 95,
Windows NT and other systems that support the DHCP client.
Server
is the default when, in menu 1,
PPPOE=Yes
.
If set to
None
, the DHCP server will be disabled.
Server Inact.
inactivates the server. This option is available only
when, in menu 1, the setting for
PPPoE Bridge= No
. You cannot
toggle this field to
Server Inact.
directly from Menu 3
.
Server Inact.
is the default when, in menu 1,
PPPoE=No
.
When
DHCP =
Server Inact.
then the
Client IP Pool Starting
Address
,
Size of Client IP Pool
,
Primary DNS Server
and
Secondary DNS Server
have
N/A
fields.
Server
None
Server Inact.
Configuration:
When DHCP is used, that is
DHCP= Server
, the following items
need to be set:
Client IP Pool
Starting
Address
This field specifies the first of the contiguous addresses in the IP
address pool.
192.168.1.33
Menu 3 – Ethernet TCP/IP & DHCP Setup
DHCP= Server Inact.
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 5
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Summary of Contents for Prestige 642M series
