P100IH ISDN Router
3-8
Internet Access
From the Main Menu, enter option
Internet Access Setup
to go to Menu 4 - Internet Access Setup, as
displayed below. The following table contains instructions on how to configure your Prestige for Internet
access.
Figure 3-2 Menu 4 – Internet Access Setup
Table 3-4 Internet Access Setup Menu Fields
Field
Description
ISP’s Name
Enter the name of your Internet Service Provider, e.g., myISP.
This information is for identification purposes only.
ISP IP Addr
Enter the IP Address of the remote gateway at the ISP’s site. If
you don’t have this data, just leave it blank.
Pri Phone and Sec
Phone Number
Both the Primary and the Secondary Phone number refer to the
number that the Prestige dials to connect to the ISP.
My Login Name
Enter the login name given to you by your ISP.
My Password
Enter the password associated with the login name above.
My WAN IP Addr=
NAT
Choose from None, Full Feature or SUA Only.
See Chapter 4:
for a full discussion of this new feature.
Address Mapping Set=
A NAT Server Set is a list of LAN side servers mapped to
external ports (similar to the old SUA menu 15.1 before). You
Menu 4 - Internet Access Setup
ISP's Name= ?
Pri Phone #= ?
Sec Phone #=
My Login=
My Password= ********
My WAN IP Addr=
NAT= None
Address Mapping Set= N/A
Telco Options:
Transfer Type= 64K
Multilink= Off
Idle Timeout= 300
Enter here to CONFIRM or ESC to CANCEL:
