P100IH ISDN Router
Hardware Installation and Setup
2-13
Figure 2-9 ISDN Advanced Setup
When you are finished, press
ENTER
at the message: ‘Press ENTER to confirm’, the Prestige uses the
information that you entered to initialize the ISDN line. It should be noted that whenever the switch type is
changed, the ISDN initialization takes slightly longer.
At this point, the Prestige asks if you wish to test your ISDN. If you select
Yes
, the Prestige will perform a
loop-back test to check the ISDN line. If the loop-back test fails, please note the error message that you
receive and take the appropriate troubleshooting action.
Figure 2-10 Loopback test
2.10 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the Main Menu,
enter 3 to open Menu 3.
Figure 2-11 Menu 3 - Ethernet Setup
Menu 3 - Ethernet Setup
1. General Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Setup LoopBack Test...
Dialing to 40000// ...
Sending and Receiving Data ...
Disconnecting...
LoopBack Test OK
### Hit any key to continue. ###
Menu 2.1 - ISDN Advanced Setup
Phone 1 Call Waiting= Enable
Phone 2 Call Waiting= Enable
Calling Line Indication= Enable
