ZyXEL Communications PLA-402 v3, User Manual

Page: 51 / 94

Chapter 6 The OS X Configuration Utility
PLA-402 v3 User’s Guide
51
6.1.7 Set HomePlug Light Color
Use this screen to define which color the HomePlug light shines at various speeds.
For example, configure the light to shine red when the speed is slow enough to
warrant your attention, amber for ‘near slow’ speeds and green for acceptable
powerline coaxial speeds for your network. The
Maximum Possible Speed is the
best speed that can be attained on your electrical circuit. It varies depending on
the electrical wiring, insulation, distance between devices, and electromagnetic
interference from adjacent wiring or other electrical devices on your network.
Port # Select the type of traffic to which this rule applies. You may
select one of the following:
• FTP
• HTTP
• E-Mail
• Telnet
• User-Defined
If you select User-Defined then enter the port number that
defines that traffic type, such as 1823 for MSN traffic. See the
commom services appendix for port numbers of other traffic
types.
After you select the traffic type, select the priority level
(
Highest , High , Mid , Low ) assigned to this traffic.
Click Add to save the rule to the list in this screen.
If you want to delete an existing rule, select it in the text box
and then click
Delete .
Rule Name This field displays the name of a previously created priority rule.
Port # This field displays the port number for the type of traffic to
which this rule applies.
Priority This field displays the priority level that this traffic receives.
OK Click this button to save the settings to the device.
Cancel Click this button to close this window without saving any
changes.
Table 10 QoS Settings (continued)
LABEL DESCRIPTION