P964 APR
Cable Router with 802.11g Access Point
W
eb Based Management
3-11
“802.1x”:
There must be a RADIUS server when use this setting. 802.11b/g client devices must have a relative setting for this
option. It is also required to set the correct “PassPhrase” on RADIUS server while connecting with P964 APR.
“WPA”:
This option has the same requirement to set the RADIUS server. 802.11b/g client devices must support WPA option to
connect with P964 APR.
“WPA-PSK”:
The RADIUS server is not required, but the “WPA Pre-Shared Key” must be set. In order to connect with P964
APR, 802.11b/g client devices must support WPA option. The P964 APR also has a “WPA Group Rekey Interval” setting, the
unit is in seconds, It is a function for WPA key changeing periodically by setting the interval.
Click “
Apply
” to Save all change.
Figure 3-11 Web Management – Wireless: Security
The “
802.11b/g Access Control
” allows user to configure the Access Control of the AP and the connected clients.
“MAC Restrict Mode”:
The restrict mode can be set as ‘Allow’ or ‘Deny’ to allow or deny access client to connect the P964 APR.
Choose ‘Disabled’ without any restrictions.
“MAC Addresses”:
MAC Addresses to ‘Deny’ or ‘Allow’
Click “
Apply
” to Save all change.
“Connected Clients”:
Show the current connecting CPEs.
