ZyXEL Communications P-662HW-63, User Manual

Page: 93 / 561

Prestige 662HW Series User’s Guide
93 Chapter 8 Wireless LAN Setup
Figure 25 Prestige Wireless Security Levels
If you do not enable any wireless security on your Prestige, your network is accessible to any
wireless networking device that is within range.
Use the Prestige web configurator to configurator to set up your wireless LAN security
settings. Refer to the chapter on using the Prestige web configurator to see how to access the
web configurator.
8.3 Data Encryption with WEP
WEP encryption scrambles the data transmitted between the wireless stations and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless stations and the access points must use the
same WEP key for data encryption and decryption.
Your Prestige allows you to configure up to four 64-bit, 128-bit or 256-bit WEP keys but only
one key can be enabled at any one time.
In order to configure and enable WEP encryption; click Wireless LAN and Wireless to the
display the Wireless screen.
8.4 Configuring Wireless LAN
Note: If you are configuring the Prestige from a computer connected to the
wireless LAN and you change the Prestige’s ESSID or WEP settings, you will
lose your wireless connection when you press Apply to confirm. You must
then change the wireless settings of your computer to match the Prestige’s
new settings.