ZyXEL Communications P-661H Series, User Manual, Page: 63 / 383

P-661H/HW Series User’s Guide
Chapter 3 Wizards 63
The following table describes the fields in this screen.
This screen appears if your Internet connection uses PPPoE encapsulation.
Figure 23 Internet Setup Wizard: ISP Parameters (PPPoE)
Table 12 Internet Setup Wizard: ISP Parameters (Ethernet)
LABEL DESCRIPTION
Obtain an IP
Address
Automatically
Select this if you have a dynamic IP address.
Static IP
Address
Select this if you have a static (fixed) IP address, and enter the information below.
These fields appear if you select Static IP Address .
IP Address Enter the static IP address provided by your ISP.
Subnet Mask Enter the subnet mask provided by your ISP.
Gateway IP
Address
Enter the IP address of the gateway provided by your ISP. If your ISP did not provide
one, use the default value.
First DNS
Server
Second DNS
Server
Enter the IP address(es) of the DNS server(s) provided by your ISP. If your ISP did not
provide one or both, use the default value(s).
Back Click Back to go back to the previous screen.
Apply Click Apply to finish manual configuration. The ZyXEL Device tries to detect the
connection again. See Section 3.1 on page 60 .
Exit Click Exit to close the wizard screen without saving your changes.