manualshive.com logo in svg

ZyXEL Communications P-661H Series, User Manual, Page: 50 / 383

Share
Download
ZyXEL Communications P-661H Series User Manual Download Page 50

P-661H/HW Series User’s Guide

50

Chapter 2 Introducing the Web Configurator

VPN

Setup

Use this screen to configure each VPN tunnel.

Monitor

Use this screen to look at the current status of each VPN 

tunnel.

VPN Global 

Setting

Use this screen to allow NetBIOS traffic through VPN tunnels.

Advanced

Static Route

Use this screen to configure IP static routes.

Bandwidth 

MGMT

Summary

Use this screen to enable bandwidth management on an 

interface.

Rule Setup

Use this screen to define a bandwidth rule. 

Monitor

Use this screen to view the ZyXEL Device’s bandwidth usage 

and allotments.

Dynamic DNS

Use this screen to set up dynamic DNS.

Remote MGMT

WWW

Use this screen to configure through which interface(s) and 

from which IP address(es) users can use HTTPS or HTTP to 

manage the ZyXEL Device.

Telnet

Use this screen to configure through which interface(s) and 

from which IP address(es) users can use Telnet to manage the 

ZyXEL Device.

FTP

Use this screen to configure through which interface(s) and 

from which IP address(es) users can use FTP to access the 

ZyXEL Device.

SNMP

Use this screen to configure your ZyXEL Device’s settings for 

Simple Network Management Protocol management.

DNS

Use this screen to configure through which interface(s) and 

from which IP address(es) users can send DNS queries to the 

ZyXEL Device.

ICMP

Use this screen to change your anti-probing settings.

UPnP

Use this screen to enable UPnP on the ZyXEL Device.

Maintenance

System 

General

This screen contains administrative and system-related 

information and also allows you to change your password.

Time Setting

Use this screen to change your ZyXEL Device’s time and date.

Logs

View Log

Use this screen to view the logs for the categories that you 

selected.

Log Settings

Use this screen to change your ZyXEL Device’s log settings.

Tools

Firmware

Use this screen to upload firmware to your ZyXEL Device.

Configuration

Use this screen to backup and restore the configuration or reset 

the factory defaults to your ZyXEL Device.

Restart

This screen allows you to reboot the ZyXEL Device without 

turning the power off.

Diagnostic

General

These screens display information to help you identify problems 

with the ZyXEL Device general connection.

DSL Line

These screens display information to help you identify problems 

with the DSL line.

Table 3   

Web Configurator Screens Summary (continued)

LINK/ICON

SUB-LINK

FUNCTION

Summary of Contents for P-661H Series
































































































































































































































































































































































































Reviews:

No comments