ZyXEL Communications P-660R-D Series, User Manual

Page: 174 / 204

P-660R-D Series User’s Guide
14 Appendix D Setting up Your Computer’s IP Address
3 Click OK to save the changes and close the Ethernet Device General screen.
4 If you know your DNS server IP address(es), click the DNS tab in the Network Configuration
screen. Enter the DNS server information in the fields provided.
Figure 112 Red Hat 9.0: KDE: Network Configuration: DNS
5 Click the Devices tab.
6 Click the Activate button to apply the changes. The following screen displays. Click Yes to save the
changes in all screens.
Figure 113 Red Hat 9.0: KDE: Network Configuration: Activate
7 After the network card restart process is complete, make sure the Status is Active in the Network
Configuration screen.
Using Configuration Files
Follow the steps below to edit the network configuration files and set your computer IP address.
1
Assuming that you have only one network card on the computer, locate the
ifconfig-eth0
configuration file (where
eth0
is the name of the Ethernet card). Open the configuration file with any
plain text editor.
• If you have a dynamic IP address, enter
dhcp
in the
BOOTPROTO=
field. The
following figure shows an example.