ZyXEL Communications P-2302R-P1 Series User Manual Download Page 77

Page: 77 / 294

P-2302R-P1 Series User’s Guide

Chapter 5 Status Screens

Figure 32

VoIP Statistics Window

Each field is described in the following table.

Table 26

VoIP Statistics Window

LABEL

DESCRIPTION

SIP Status

Account

This column displays each SIP account in the ZyXEL Device.

Registration

This field displays the current registration status of the SIP account. You can

change this in the

Status

screen.

Registered

- The SIP account is registered with a SIP server.

Register Fail

- The last time the ZyXEL Device tried to register the SIP account

with the SIP server, the attempt failed. The ZyXEL Device automatically tries to

it.

Inactive

- The SIP account is not active. You can activate it in

VoIP > SIP > SIP

Settings

Last Registration

This field displays the last time you successfully registered the SIP account. It

displays

N/A

if you never successfully registered this account.

URI

This field displays the account number and service domain of the SIP account. You

can change these in

VoIP > SIP > SIP Settings

Protocol

This field displays the transport protocol the SIP account is currently using.

Message Waiting

This field indicates whether or not there are any messages waiting for the SIP

account.

Last Incoming

Number

This field displays the last number that called the SIP account. It displays

N/A

if no

number has ever dialed the SIP account.

Last Outgoing

Number

This field displays the last number the SIP account called. It displays

N/A

if the SIP

account has never dialed a number.

Call Statistics

Phone

This field displays each phone port in the ZyXEL Device.

Summary of Contents for P-2302R-P1 Series







































































































































































































































































































Search results

Summary of Contents for P-2302R-P1 Series

Reviews:

Related manuals for P-2302R-P1 Series

Brands by name

Popular brands

ZyXEL Communications P-2302R-P1 Series, User Manual

Search results

Summary of Contents for P-2302R-P1 Series

Reviews:

Related manuals for P-2302R-P1 Series

Brands by name

Popular brands