ZyXEL Communications NWA1100N-CE CloudEnabled, Quick Start Manual

Page: 9 / 16

Page 9
Option 2 – Use in individually configured mode
2.1. Connection and Login
Step 1
: Connect the NWA1100N-CE directly to your computer using an
Ethernet cable. Even though you can connect to the Access Point wirelessly, it
is recommended that you established a wired connection to your computer
for initial configuration.
Step 2 : Configure the Ethernet connection of your computer as follows:

IP Address: within the 192.168.1.3 - 192.168.1.254 range

Subnet Mask: 255.255.255.0
Step 3 : Launch a web browser, type the default IP address of the Access Point
(http://192.168.1.2) and press Enter.
Step 4:
Type “ admin ” in the Username field and “ 1234 ” in the Password field,
and then click on the Login button.
It is recommended that you change the login password when prompted. Be
sure to record the new password and keep it in a safe place. If you change the
password and then forget it, you will need to reset the Access Point to factory
defaults.