ZyXEL Communications NWA1100N-CE CloudEnabled, Quick Start Manual

Page: 6 / 16

Page 6
1.3.2 Deploying Your Access Point without Dynamic
IP Addressing (DHCP)
If your network does not automatically assign IP addresses (No DHCP service),
follow these steps to configure your Access Point:
Step 1 : Connect the NWA1100N-CE directly to your computer using an
Ethernet cable.
Step 2 : Configure the Ethernet connection of your computer as follows:

IP Address: within the 192.168.1.3 - 192.168.1.254 range

Subnet Mask: 255.255.255.0
Step 3 : Launch a web browser, type the default IP address of the Access Point
(http://192.168.1.2) and press Enter.
Step 4:
Type “ admin ” in the Username field and “ 1234 ” in the Password field,
and then click on the Login button.