ZyXEL Communications NWA-3500 User Manual Download Page 49

Page: 49 / 324

Chapter 3 Status Screens

ZyXEL NWA-3500 User’s Guide

WLAN2 Associations This field displays the number of wireless clients currently associated to

the second wireless module. Each wireless module supports up to 128

concurrent associations.

Interface Status

Interface

This column displays each interface of the ZyXEL Device.

Status

This field indicates whether or not the ZyXEL Device is using the interface.
For each interface, this field displays

when the ZyXEL Device is using

the interface and

Down

when the ZyXEL Device is not using the interface.

Rate

For the LAN port this displays the port speed and duplex setting.
For the WLAN1 and WLAN2 interfaces, it displays the downstream and

upstream transmission rate or

N/A

if the interface is not in use.

SSID Status

Interface

This column displays each of the ZyXEL Device’s wireless interfaces,

WLAN1

and

WLAN2

SSID

This field displays each of the SSIDs currently used by each wireless

module.

BSSID

This field displays the MAC address of the wireless adaptor.

Security

This field displays the type of wireless security used by each SSID.

VLAN

This field displays the VLAN ID of each SSID in use, or Disabled if the

SSID does not use VLAN.

System Status

Show Statistics

Click this link to view port status and packet specific statistics. See

Section

17.2 on page 205

Association List

Click this to see a list of wireless clients currently associated to each of the

ZyXEL Device’s wireless modules. See

Section 17.3 on page 207

Channel Usage

Click this to see which wireless channels are currently in use in the local

area. See

Section 17.4 on page 208

Logs

Click this to see a list of logs produced by the ZyXEL Device. See

Chapter

15 on page 181

Rogue AP

Click this to see a list of unauthorized access points in the local area. See

Section 11.3.3 on page 145

Table 2

The Status Screen

LABEL

DESCRIPTION

Summary of Contents for NWA-3500





































































































































































































































































































































Search results

Summary of Contents for NWA-3500

Reviews:

Related manuals for NWA-3500

Brands by name

Popular brands

ZyXEL Communications NWA-3500, User Manual

Search results

Summary of Contents for NWA-3500

Reviews:

Related manuals for NWA-3500

Brands by name

Popular brands