ZyXEL Communications NWA-3500 User Manual Download Page 48

Page: 48 / 324

Chapter 3 Status Screens

ZyXEL NWA-3500 User’s Guide

The following table describes the labels in this screen.

Table 2

The Status Screen

LABEL

DESCRIPTION

Automatic Refresh

Interval

Enter how often you want the ZyXEL Device to update this screen.

Refresh

Click this to update this screen immediately.

System Information

System Name

This field displays the ZyXEL Device system name. It is used for

identification. You can change this in the

System > General

screen’s

System Name

field.

Model

This field displays the ZyXEL Device’s exact model name.

Firmware Version

This field displays the current version of the firmware inside the device. It

also shows the date the firmware version was created. You can change the

firmware version by uploading new firmware in

Maintenance > F/W

Upload

System Up Time

This field displays the elapsed time since the ZyXEL Device was turned on.

Current Date Time

This field displays the date and time configured on the ZyXEL Device. You

can change this in the

System

Time Setting

screen.

WLAN1 Operating

Mode

This field displays the current operating mode of the first wireless module

(

Bridge / Repeater

AP + Bridge

MBSSID

). You can change the

operating mode in the

Wireless

screen.

WLAN2 Operating

Mode

This field displays the current operating mode of the second wireless

module (

Bridge / Repeater

AP + Bridge

MBSSID

). You can

change the operating mode in the

Wireless

screen.

Management VLAN

This field displays the management VLAN ID if VLAN is active, or

Disabled

if it is not active. You can enable or disable VLAN, or change the

management VLAN ID, in the

VLAN

Wireless VLAN

screen.

This field displays the current IP address of the ZyXEL Device on the

network.

LAN MAC

This displays the MAC (Media Access Control) address of the ZyXEL

Device on the LAN. Every network device has a unique MAC address

which identifies it across the network. Your ZyXEL Device features dual

wireless module, and has two MAC addresses. The MAC address of the

first wireless module (

WLAN1

) is used on the LAN.

WLAN1 MAC

This displays the MAC address of the first wireless module.

WLAN2 MAC

This displays the MAC address of the second wireless module.

System Resources

Flash

This field displays the amount of the ZyXEL Device’s flash memory

currently in use. The flash memory is used to store firmware and SSID

profiles.

Memory

This field displays what percentage of the ZyXEL Device’s volatile memory

is currently in use. The higher the memory usage, the more likely the

ZyXEL Device is to slow down. Some memory is required just to start the

ZyXEL Device and to run the web configurator.

CPU

This field displays what percentage of the ZyXEL Device’s processing

ability is currently being used. The higher the CPU usage, the more likely

the ZyXEL Device is to slow down.

WLAN1 Associations This field displays the number of wireless clients currently associated to

the first wireless module. Each wireless module supports up to 128

concurrent associations.

Summary of Contents for NWA-3500





































































































































































































































































































































Search results

Summary of Contents for NWA-3500

Reviews:

Related manuals for NWA-3500

Brands by name

Popular brands

ZyXEL Communications NWA-3500, User Manual

Search results

Summary of Contents for NWA-3500

Reviews:

Related manuals for NWA-3500

Brands by name

Popular brands