ZyXEL Communications NWA-3100, User Manual

Page: 194 / 294

Chapter 18 LAN Setup
ZyXEL NWA-3100 User’s Guide
194
Follow the instructions in the following table on how to configure the fields in this menu.
Table 71 Menu 3.2 TCP/IP Setup
FIELD DESCRIPTION
IP Address
Assignment
Press [SPACE BAR] and then [ENTER] to select Dynamic to have the ZyXEL
Device obtain an IP address from a DHCP server. You must know the IP address
assigned to the ZyXEL Device (by the DHCP server) to access the ZyXEL Device
again.
Select
Static to give the ZyXEL Device a fixed, unique IP address. Enter a subnet
mask appropriate to your network and the gateway IP address if applicable.
IP Address Enter the (LAN) IP address of your ZyXEL Device in dotted decimal notation
IP Subnet Mask Your ZyXEL Device will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the ZyXEL Device.
Gateway IP
Address
Type the IP address of the gateway. The gateway is an immediate neighbor of your
ZyXEL Device that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same network segment as your ZyXEL Device.
When you have completed this menu, press [
ENTER
] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [
ESC
] at any time to cancel.