manualshive.com logo in svg

ZyXEL Communications Network Device P-2302, User Manual, Page: 280 / 359

Share
Download
ZyXEL Communications Network Device P-2302 User Manual Download Page 280

Chapter 25 Troubleshooting

P-2302HWUDL-P1 Series User’s Guide

280

25.2  ZyXEL Device Access and Login

V

I forgot the IP address for the ZyXEL Device.

1

The default IP address is 

192.168.1.1

.

2

If you changed the IP address and have forgotten it, you might get the IP address of the 
ZyXEL Device by looking up the IP address of the default gateway for your computer. 
To do this in most Windows computers, click 

Start > Run

, enter 

cmd

, and then enter 

ipconfig

. The IP address of the 

Default Gateway

 might be the IP address of the ZyXEL 

Device (it depends on the network), so enter this IP address in your Internet browser.

3

If this does not work, you have to reset the device to its factory defaults. See 

Section 2.3 

on page 41

.

V

I forgot the password.

1

The default password is 

1234

.

2

If this does not work, you have to reset the device to its factory defaults. See 

Section 2.3 

on page 41

.

V

I cannot see or access the Login screen in the web configurator.

1

Make sure you are using the correct IP address.
• The default IP address is 

192.168.1.1

.

• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting 

suggestions for 

I forgot the IP address for the ZyXEL Device.

2

Check the hardware connections, and make sure the LEDs are behaving as expected. See 
the Quick Start Guide and 

Section 1.4 on page 36

.

3

Make sure your Internet browser does not block pop-up windows and has JavaScripts 
and Java enabled. See 

Appendix B on page 293

.

4

If you disabled 

Any IP

 (

Section 7.1.7 on page 108

), make sure your computer is in the 

same subnet as the ZyXEL Device. (If you know that there are routers between your 
computer and the ZyXEL Device, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a 

dynamic IP address. See 

Appendix D on page 307

. Your ZyXEL Device is a DHCP 

server by default. 

• If there is no DHCP server on your network, make sure your computer’s IP address is 

in the same subnet as the ZyXEL Device. See 

Appendix D on page 307

.

Summary of Contents for Network Device P-2302








































































































































































































































































































































































Reviews:

No comments