ZyXEL Communications Network Device P-2302 User Manual Download Page 36 | Manualshive

Page: 36 / 359

background image

Chapter 1 Introducing the ZyXEL Device

P-2302HWUDL-P1 Series User’s Guide

36

Use content filtering to block access to specific web sites, with URL’s containing keywords
that you specify. You can define time periods and days during which content filtering is
enabled and include or exclude particular computers on your network from content filtering.
For example, you could block access to certain web sites for the kids.
Use bandwidth management to efficiently manage traffic on your network by giving priority
to certain types of traffic and/or to particular computers. For example, you could make sure
that the ZyXEL Device gives voice over Internet calls high priority, and/or limit bandwidth
devoted to the boss’s excessive file downloading.

1.2 Ways to Manage the ZyXEL Device

Use any of the following methods to manage the ZyXEL Device.

• Web Configurator. This is recommended for everyday management of the ZyXEL Device

using a web browser.

• Command Line Interface. Line commands are mostly used for troubleshooting by service

engineers.

• FTP for firmware upgrades and configuration backup/restore (

Chapter 18 on page 211

• SNMP. The device can be monitored by an SNMP manager. See the SNMP chapter in this

User’s Guide.

• SPTGEN. SPTGEN is a text configuration file that allows you to configure the device by

uploading an SPTGEN file. This is especially convenient if you need to configure many
devices of the same type.

1.3 Good Habits for Managing the ZyXEL Device

Do the following things regularly to make the ZyXEL Device more secure and to manage the
ZyXEL Device more effectively.

• Change the password. Use a password that’s not easy to guess and that consists of

different types of characters, such as numbers and letters.

• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). Restoring an

earlier working configuration may be useful if the device becomes unstable or even
crashes. If you forget your password, you will have to reset the ZyXEL Device to its
factory default settings. If you backed up an earlier configuration file, you would not have
to totally re-configure the ZyXEL Device. You could simply restore your last
configuration.

1.4 LEDs (Lights)

The following graphic displays the labels of the LEDs.

«
...
34
35
36
37
38
...
»

Summary of Contents for Network Device P-2302








































































































































































































































































































































































Reviews:

No comments

Related manuals for Network Device P-2302

PVSG-IQAN-C2E1M2W1U1

Brand: Parker Pages: 70

Brand: NKE Pages: 14

Brand: ABB Pages: 20

Brand: Gree Pages: 31

Brand: Bticino Pages: 4

Brand: Watts Pages: 108

Wireless Media Gateway WMG120

Brand: ViewSonic Pages: 105

Brand: More Pages: 24

Brand: schmalenberger Pages: 28

Brand: Nexcom Pages: 24

1-Wire Gateway 20 Modbus TCP

Brand: esera automation Pages: 10

Brand: Sentera Controls Pages: 4

Brand: Zte Pages: 125

Brand: Artistic Licence Pages: 12

GW11X8-8D (3IN1)-RJ45 Series

Brand: 3onedata Pages: 4

Thingsee GATEWAY GLOBAL

Brand: Haltian Pages: 14

Brand: Zennio Pages: 35

Brand: SAGEMCOM Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands