Chapter 14 Maintenance
NBG6604 User’s Guide
92
The following table describes the labels in this screen.
14.4 Pa sswo rd Sc re e n
It is strongly recommended that you change your NBG6604's password.
If you forget your NBG6604's password (or IP address), you will need to reset the device. See
Section 14.8
on page 96
for details.
Click
Ma inte na nc e
>
Pa sswo rd
. The screen appears as shown.
Fig ure 59
Maintenance > Password
The following table describes the labels in this screen.
Table 35 Maintenance > General
LABEL
DESC RIPTIO N
System Name
System Name is a unique name to identify the NBG6604 in an Ethernet network.
Domain Name
Enter the domain name you want to give to the NBG6604.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times out.
The default is 5 minutes. After it times out you have to log in with your password again. Very
long idle timeouts may have security risks. A value of "0" means a management session
never times out, no matter how long it has been left idle (not recommended).
Apply
Click
A p p ly
to save your changes back to the NBG6604.
Cancel
Click
C a nc e l
to begin configuring this screen afresh.
Table 36 Maintenance > Password
LABEL
DESC RIPTIO N
Old Password
Type the default password or the existing password you use to access the system in this
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click
A p p ly
to save your changes back to the NBG6604.
Cancel
Click
C a nc e l
to begin configuring this screen afresh.
