Chapter 10 Wireless LAN
NBG6604 User’s Guide
76
10.6 Adva nc e d Sc re e n
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
settings.
Click
Wire le ss >
Adva nc e d
. The screen appears as shown.
Fig ure 46
Wireless > Advanced
The following table describes the labels in this screen.
Table 27 Wireless > Advanced
LABEL
DESC RIPTIO N
Wireless Advanced Setup
Band
Select the frequency band to set whether you want to apply the wireless and security settings
to the default
2.4G Hz
or
5G Hz
wireless LAN.
RTS/CTS Threshold
Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS (Clear
To Send) handshake.
This field is not configurable and the NBG6604 automatically changes to use the maximum
value if you select
802.11n
,
802.11a n
,
802.11g n,
or
802.11b g n
in the
Wire le ss
screen.
Fragmentation
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent.
This field is not configurable and the NBG6604 automatically changes to use the maximum
value if you select
802.11n
,
802.11a n
,
802.11g n,
or
802.11b g n
in the
Wire le ss
screen.
Intra-BSS Traffic
A Basic Service Set (BSS) exists when all communications between wireless clients or between
a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When you
Ena b le
Intra-BSS, wireless
clients can access the wired network and communicate with each other. When you
Disa b le
Intra-BSS, wireless clients can still access the wired network but cannot communicate with
each other.
Tx Power
Set the output power of the NBG6604 in this field. If there is a high density of APs in an area,
decrease the output power of the NBG6604 to reduce interference with other APs. Select one
of the following
100%
,
90%
,
75%
,
50%
,
25% ,
or
10%
.
QoS Setup
