Chapter 1 Introduction
NBG6604 User’s Guide
12
1.8 Wa ll Mo unting
You may need screw anchors if mounting on a concrete or brick wall.
Fig ure 3
Screw Specifications
1
Select a position free of obstructions on a wall strong enough to hold the weight of the device.
2
Mark two holes on the wall at the appropriate distance apart for the screws.
Be c a re ful to a vo id da m a g ing pipe s o r c a b le s lo c a te d inside the wa ll
whe n drilling ho le s fo r the sc re ws.
3
If using screw anchors, drill two holes for the screw anchors into the wall. Push the anchors into the full
depth of the holes, then insert the screws into the anchors. Do not insert the screws all the way in - leave
a small gap of about 0.5 cm.
If not using screw anchors, use a screwdriver to insert the screws into the wall. Do not insert the screws all
the way in - leave a gap of about 0.5 cm.
4
Make sure the screws are fastened well enough to hold the weight of the NBG6604 with the connection
cables.
5
Align the holes on the back of the NBG6604 with the screws on the wall. Hang the NBG6604 on the
screws.
Table 3 Wall Mounting Information
Distance between holes
83 mm
M4 Screws
Two
Screw anchors (optional)
Two
