manualshive.com logo in svg

ZyXEL Communications MAX-207HW2R, User Manual

Share
Download
ZyXEL Communications MAX-207HW2R User Manual Download Page 99

 Chapter 10 The Service Configuration Screens

MAX-207HW2R User’s Guide

99

10.1.3  Before you Begin

• Ensure that you have all of your voice account information on hand. If not, 

contact your voice account service provider to find out which settings in this 

chapter you should configure in order to use your telephone with the MAX-

207HW2R.

• Connect your MAX-207HW2R to the Internet, as described in the Quick Start 

Guide. If you have not already done so, then you will not be able to test your 

VoIP settings.

10.2  SIP Settings

Click VOICE > Service Configuration > SIP Setting to setup and maintain 
your SIP account(s) in the MAX-207HW2R. Your VoIP or Internet service provider 
should provide you with your account information. You can also enable and disable 
each SIP account.

Figure 40   

VOICE > Service Configuration > SIP Setting

The following table describes the labels in this screen.  

Table 36   

VOICE > Service Configuration > SIP Setting

LABEL

DESCRIPTION

SIP Account

Select the SIP account you want to see in this screen. If you change this 
field, the screen automatically refreshes.

SIP Settings
Active SIP 
Account

Select this if you want the MAX-207HW2R to use this account. Clear it if 
you do not want the MAX-207HW2R to use this account.

Phone 

Number

Enter your SIP number. In the full SIP URI, this is the part before the @ 
symbol.  You can use up to 127 printable ASCII characters.

Summary of Contents for MAX-207HW2R























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands