ZyXEL Communications MAX-207HW2R User Manual Download Page 49

Page: 49 / 150

Chapter 5 The LAN Configuration Screens

MAX-207HW2R User’s Guide

5.5 Advanced

Click ADVANCED > LAN Configuration > Advanced to set the RIP and
Multicast options.

Figure 15

ADVANCED > LAN Configuration > Advanced

The following table describes the labels in this screen.

Table 13

ADVANCED > LAN Configuration > Advanced

LABEL

DESCRIPTION

RIP & Multicast Setup
RIP Direction

Use this field to control how much routing information the MAX-
207HW2R sends and receives on the subnet.

• None - The MAX-207HW2R does not send or receive routing

information on the subnet.

• Both - The MAX-207HW2R sends and receives routing information

on the subnet.

• In Only - The MAX-207HW2R only receives routing information on

the subnet.

• Out Only - The MAX-207HW2R only sends routing information on

the subnet.

RIP Version

Select which version of RIP the MAX-207HW2R uses when it sends or
receives information on the subnet.

• RIP-1 - The MAX-207HW2R uses RIPv1 to exchange routing

information.

• RIP-2B - The MAX-207HW2R broadcasts RIPv2 to exchange routing

information.

• RIP-2M - The MAX-207HW2R multicasts RIPv2 to exchange routing

information.

Summary of Contents for MAX-207HW2R























































































































































Search results

Summary of Contents for MAX-207HW2R

Reviews:

Brands by name

Popular brands

ZyXEL Communications MAX-207HW2R, User Manual

Search results

Summary of Contents for MAX-207HW2R

Reviews:

Brands by name

Popular brands