ZyXEL Communications MAX-207HW2R, User Manual

Page: 148 / 150

Chapter 15 The Firewall Screens
MAX-207HW2R User’s Guide
148
15.2.3 Firewall Setting Options
Click TOOLS > Firewall > General to configure the basic settings for your
firewall.
Figure 66 TOOLS > Firewall > General
The following table describes the labels in this screen.
Table 60 TOOLS > Firewall > General
LABEL DESCRIPTION
Firwall Setup
Enable Firewall
Select this to activate the firewall. The MAX-207HW2R controls access
and protects against Denial of Service (DoS) attacks when the firewall
is activated.
Bypass Triangle
Route Select this if you want to let some traffic from the WAN go directly to a
computer in the LAN without passing through the MAX-207HW2R.
Packet Direction
Log
Select the situations in which you want to create log entries for firewall
events.
No Log - do not create any log entries
Log Blocked - (LAN to WAN only) create log entries when packets are
blocked
Log All - create log entries for every packet
Apply Click to save your changes.
Reset Click to restore your previously saved settings.